Engine problem fimi x8 se 2020

Hello,

my drone had a problem, the motor of the upper right arm is not fixed. It's as if a screw was gone.

I would like to try to see if it is indeed a screw problem but there is a part sticking just below the engine, here is the part in question:

part sticking below the engine

I guess the screws are under this part because the lower arms don't have any parts glued below their engine and do have screws:

lower Engine

Is it possible to remove the part to access the screw? I tried to unscrew it of course but it is as if it was sticking.

I would like to avoid buying a new arm, I'm not good at this sort of thing.

Thank you :)

submitted by /u/Deelium
[link] [comments]

source https://www.reddit.com/r/drones/comments/nedsm8/engine_problem_fimi_x8_se_2020/

Comentarios

Entradas populares de este blog

360 aerial video of Salinas de Imon

We offer the ability to record video from the air in 360 format As we already assumed in a previous post we were delighted to participate in the technical marketing event hosted by MarketingDirecto.com where we first introduced our new service 360º aerial photography using a drone : a type of video that comes with a number of benefits as well as challenges. Advantages of aerial photography in 360 On the one hand, it makes a difference immersive 360º videos offering something entirely new as the experience of putting on virtual reality glasses and contemplating a Video from the air 360 To date, this is one of the closest sensations to the feeling of flying like a bird. It is also an incredibly beautiful and attractive way to display and promote tourist attractions. Problems with video from the air in 360 On the contrary, creating this type of video adds the individual complications of getting the drone up in the air and recording 360-degree video, the biggest challenge is developing...

Purchase and use of parachutes for drones

The new law will allow working in conditions that were previously illegal. One operational scenario that has been most needed is flying drones in urban areas or over crowds of people, and this will be possible with a few requirements. One of them, the one that drives most operators crazy, is that the drone has an impact energy absorption system (airbag or parachute). The problem with this is that AESA has not yet decided on the specifications that these devices will need. Logically, it is about introducing a new element for improvement aviation security in the use of drones, but in this case the indications for use are not very clear. The subject seems delicate and following the rules can be costly. We will comment on the current situation and how DronProfessional.com is handling it A parachute is a good item to minimize damage in case of accidental drops of the drone. They help minimize damage to aircraft, cameras and LiPo batteries. The latter can become dangerous, as they ...

Análisis del incidente con drones en el aeropuerto de Gatwick

4.7/5 – (8 votos) Sin duda este no es el primer incidente entre drones y aviones, pero este último ha provocado un caos brutal durante nada menos que 24 horas en el aeropuerto de Gatwick en Lontres y por ello marcará necesariamente un antes y un después en la historia de los drones y en la gestión de los aeropuertos. ¿Por qué este incidente marcará un antes y un después? Los aeropuertos no pueden permitirse el lujo de sufrir este tipo de incidentes y adoptarán toda clase de medidas para poder dar respuesta a cualquier imprevisto de esta clase. La seguridad aérea está formada por un conjunto de medidas encaminadas a evitar los incidentes en todo tipo de aeronaves. En ese sentido, cada incidente grave se ve acompañado a posteriori de una ingente labor de investigación para determinar las causas de cada accidente aéreo. El objetivo de todo ello es incorporar nuevas medidas en los procedimientos operativos y en el entrenamiento de pilotos para evitar en la medida de lo posible nuevos acc...

Drone City

Buscar este blog